Kunsan Air Base Alarms Monitor Quality Control (QC) Practice Exam

These questions are part of the practice quiz. Start practicing

• When an alarm annunciates, what will the operator's first action be?
• How are the function keys identified on the screen?
• Which component handles continuous recording for VICADS?
• Which factor is identified as a weakness of the Vindicator system?
• Which PL Resource corresponds to AF operational/mission support assets that the loss, theft, misuse, damage, compromise and/or distraction would ADVERSELY AFFECT MISSION CAPABILITY (example: Armories, DFAC, banks)?
• If a signal indicates all secure after a drill, which code would have been used?
• What is an AF Form 340?
• Which statement best describes PL Resource 2's impact description?
• How many invalid PIN attempts trigger a duress condition?
• Which code indicates all secure?
• Which PL Resource includes Armories, DFAC, and banks as an example?
• Which key logs off the system?
• In a case of an alarm at a controlled area facility, which command level should be alerted first?
• Code 20 corresponds to which area?
• What federal agency governs our entire electronic communication system?
• What alarms must be tested for an alarm test?
• Which alarm sound indicates a Standard alarm?
• What does the asterisk next to an alarm indicate?
• What does SECACC stand for?
• What will the alarm monitor do before the alarms test is conducted?
• What is the purpose of alarm codes?
• Besides the colors, how can an alarm monitor identify the alarm?
• IDS keypad is a component of which system?
• When an Alarm Monitor receives a Low Battery alarm, who should be contacted immediately?
• What does YELLOW alarm color signify?
• How will alarm test be documented?
• Who must be notified if two or more nuisance alarms are received from the same facility or structure within a 24-hour period?
• When assuming post as alarm monitor, what is the first action?
• True or false: Operators will not attempt to configure the system.
• What is the initial action when a video loss alarm occurs?
• Which area is identified by the code 5?
• What is the purpose of an identification code?
• Partial IDS failure affects detection in areas where?
• Which PL Resource covers assets for which loss would degrade warfighting capabilities, including F-16s?
• What is an AAAL and its purpose?
• Which area is assigned the code 5 in the control areas label?
• Which pattern indicates a Test failure event?
• When an alarm check is requested, what items does the alarm monitor log?
• If the alarm monitor cannot make contact with the building custodian after three attempts, who will they contact?
• Who would you notify if there's an alarm for a facility that is a controlled area?
• Who decides whether video loss alarms should dispatch?
• Can you refuse an alarm test?
• Which code represents a weapons escort?
• What does BLUE flashing indicate?
• Which FPCON level indicates an attack has occurred or intelligence received indicating an imminent threat against a specific location?
• If you need to silence an alarm immediately, which key do you use?
• Which PL Resource corresponds to AF power projection assets for which loss, theft, misuse, damage, compromise and/or distraction results in UNACCEPTABLE MISSION DEGRADATION to the strategic capability of the United States or CATASTROPHIC CONSEQUENCES for the nation?
• What are F1-F6 function keys known as?
• Which key opens the Action List window?
• Which code indicates command post relocation: alt to primary?
• What does MAGENTA alarm color represent?
• Which key will show the next CCTV view?
• Who is authorized to monitor the vindicator alarm system?
• The keypad at each facility helps reduce interaction with which group?
• What should TAMPER boxes be locked with?
• What pattern indicates Auto acknowledge?
• What is the correct sequence of steps for starting an alarm test?
• Which code describes a Bomb threat?
• Code 7 corresponds to which area?
• During a full alarm monitor shift, which action is required of the operator?
• Which code corresponds to a Suspicious Package?
• Which code indicates Officer needs assistance?
• After an alarm monitor authenticates with a custodian for an alarm test, what will the custodian state?
• Where should duress checks be annotated?
• Deferring alarms is done on what basis?
• Code 15 maps to which area?
• The alarm monitor controls access into which areas?
• A field report notes that authorities need to know the status of someone in custody; which code is used?
• What are the three primary Alarm Monitor responsibilities?
• If no contact is made inside the facility after an alarm, how will you attempt to make contact with a custodian?
• Where on the installation can the alarm monitor be located?
• Which FPCON level indicates an increased general threat, with unpredictable nature and extent against personnel and facilities?
• Which key opens the Configuration window?
• Who initiates the alarm test log entry?
• Which statement best describes when owners are contacted?
• Which code is assigned to a Suspicious Substance?
• Capacitance Proximity Sensor (CPS) detects penetration through openings what are they? (grill bars/shutters) Also used on safes.
• Authentication codes are usually in what form?
• Which alarm sound corresponds to a Communication failure event?
• What information can alarm monitors pass to responding patrols by utilizing PIRS and BMS alarms?
• Which code corresponds to urgent situations?
• What are the two program applications that VICADS uses?
• Which option correctly describes RED flashing?
• The Action List Window is accessed by which key?
• What is the activation result for IDS keypad when SECACC is entered?
• Which alarm sound indicates an Access event?
• Which function keys do operators use on a daily basis?
• If communication failure resets itself, what will you do as a response?
• The Tree Area is identified by which code?
• Which sound corresponds to a Low priority alarm?
• Which of the following best describes a nuisance alarm?
• In case of system failure, what will the alarm monitor do?
• What must you authenticate with the building custodian before authorizing access to the building?
• Which code indicates a Suspicious package?
• WSTI – Wide Surveillance Thermal Imager provides which features?
• What information must be listed on an AAAL?
• Which code would be used for an Unannounced alarm activation?
• Which key combination defers multiple alarms in one command?
• What is the purpose of the Tamper Junction Box?
• What is a nuisance alarm?
• Which alarm sound indicates a High priority alarm?
• Which statement is a strength of the Vindicator system?
• BLUE alarm color indicates which of the following conditions?
• Which PL Resource includes Air Force 1, nukes, designated critical areas as an example?
• What does VICADS stand for?
• Which FPCON level indicates an incident occurs or intelligence is received indicating some form of terrorist action or targeting against personnel or facilities is likely?
• Catastrophic IDS failure is defined as?
• Which area is designated by the code 1?
• Once power is restored, how long is the building custodian required to remain at the facility to allow batteries enough time to recharge?
• What is the first action the alarm monitor takes before an alarm test?
• SECACC is the security access code for which device?
• Which option best describes the RED alarm color?
• Which pattern indicates a Standard alarm?
• Which alarm sound corresponds to a Test failure event?
• Partial IDS failure is defined as?
• The Status Window shows all alarms in their current state.
• How many videos can be viewed and controlled simultaneously on VICADS?
• The keypad located at each facility alleviates interaction with which group?
• What is the stated purpose of deferring an alarm using F7?
• What do duress codes provide?
• Korean Contractors correspond to which code?
• Which area corresponds to code 7?
• Armed guard protection for arms and ammo lasts until when?
• Which characteristic best describes a strength of the Vindicator system?
• Which code stands for Unannounced alarm activation?
• Which role is responsible for investigating nuisance alarms when a negative performance trend is detected?
• Which statement about the daily-use function keys is true?
• PTZ is defined as Pan Tilt Zoom. Which description matches its features?
• How often must alarm monitors take a no-notice test?
• What is the purpose of an AAAL?
• What are the 3 types of IDS failure?
• During shift handover, what items must be included in the changeover?
• Which key defers all alarms in one command?
• Code 15 corresponds to which area?
• Who should be trained/authorized to use authentication codes?
• Which PL Resource corresponds to AF assets in which the loss, theft, misuse, damage, compromise and/or distraction results in MISSION DEGRADATION to war fighting capabilities (example: F-16's, NMSA, alert status)?
• Which code is used for requests for wants and warrants?
• Which code corresponds to a Bomb threat?
• The duress function is activated by pressing how many buttons?
• Which code corresponds to a latrine break?
• In a major IDS failure, what risk?
• Among the listed controlled areas, which is mapped to the code 1?
• What is the recommended procedure if the custodian cannot be reached after the three contact attempts?
• When a monitor cannot determine the cause via immediate visual assessment or posted sentry, what will they do?
• Which action is associated with the F7 key?
• After acknowledging an alarm, which actions can be taken?
• Into how many sections is the VCC screen divided?
• Which code denotes a routine traffic stop?
• Changeover procedures include which items?
• A call is made for emergency response after a security incident; which code is used?
• What system provides 24/7 recording through the NVR and displays video on alarm via CCDE integration?
• Which code represents COMMAND POST RELOCATION: PRIMARY TO ALT?
• Capacitance Proximity Sensor (CPS) is a line-type sensor that detects penetration through openings that are covered by what?
• What alarm usually follows a PIR?
• Which code indicates a Weapons escort is in effect?
• What does Code 3 indicate?
• Which key opens the Attention window?
• Which pattern indicates a High priority alarm?
• Which component alerts the operator to a loss of power in the system?
• Fixed/static cameras are defined as what?
• What is the form used to record a system discrepancy?
• If a document lists the area designated by code 1, which label is used?
• Which alarm sound is associated with an Access event?
• When will the operator have to secure, access, or tag a facility?
• During an alarm test log, which name is recorded?
• What are PIR alarms useful in tracking?
• Which pattern indicates a Communication failure event?
• What are the two types of alarm testing?
• Why do alarm monitors use authentication codes?
• Who protects arms and ammo facilities until repairs?
• What is the intent of tracking nuisance and false alarms?
• What is the Personal View in VICADS?
• Which PL Resource corresponds to AF power projection assets for which the loss would result in SIGNIFICANT MISSION DEGRADATION to the war fighting capabilities of the United States (example: intel-gathering systems, equipment, vital computer facilities)?
• Which code corresponds to a meal break?
• What results from human error?
• What is VICADS?
• What does pressing F1 do (besides acknowledge the alarm)?
• What is the function of the PIR (Passive infrared) detector?
• What actions will be taken in the event of a video loss alarm?
• CYAN alarm color indicates which condition?
• VICADS capabilities include viewing past and live CCTV footage?
• Where are the VCC console controls located?
• Which component is responsible for integrating VICADS video with the annunciator?
• SMPS A/C Power fail is not an alarm that requires response.
• Which areas are protected by IDS according to the alarm monitoring duties?
• Which squadron is responsible for developing identification codes, duress codes, and authentication codes?
• Which color is associated with a Tamper event?
• Which component activates when power is lost and batteries are used, indicating that other alarms may not function without AC power?
• Which area is paired with code 5 in the control areas list?
• LRTI stands for Long Range Thermal Imaging and provides which capabilities?
• Which of the following statements about authentication codes is true?
• GREEN alarm color indicates what about the alarm point?
• Do alarm monitors dispatch to video loss alarms?
• The Help Window is opened by which key?
• What is the Investigator in VICADS?
• What is the role of a duress code?
• What are all posts with a duress system installed required to do with the alarm monitor at the beginning of each shift?
• Which PL Resource includes intel-gathering systems, equipment, vital computer facilities as an example?
• Who signs the AAAL?
• Which code indicates a suspect in custody?
• What is human error caused by?
• After acknowledging the alarm, what three options does the operator have?
• Which FPCON level indicates an increased or more predictable threat of terrorist activity exists, with probable violence but nothing indicates that the installation is a target?
• The dispatcher indicates a need to check for wants and warrants; which code?
• What is the function of the Balanced Magnetic System (BMS)?
• Which statement about WSTI and LRTI is correct?
• Which of the following best describes the three primary alarm monitor responsibilities?
• Which statement is true about RED steady status?
• Which document is used to annotate duress checks?
• What does GREEN steady indicate?
• Which code signals a Possible DUI?
• The Investigator program enables security forces to view what type of footage?
• Which facilities will be given response priority?
• What triggers the Switch Mode Power Supply (SMPS) to activate?
• The Attention Window is opened by which key combination?
• What does Code 1 represent in security procedures?
• Which area is associated with the designation North and South Loop?
• Major IDS failure?
• How many times will the alarm monitor attempt to make contact with the custodian before resorting to a different method?
• Which FPCON level applies when a general global threat of possible terrorist activity exists and warrants a routine security posture?
• Where are CPS sensors commonly used besides building openings?
• Which of the following is NOT a required field on an AAAL?
• Which code indicates Duress on post or patrol?
• Which code indicates a suspect in custody of opposite gender?
• Code 7 maps to which area?
• What is the activation condition for the Balanced Magnetic System (BMS)?
• Which code indicates a frequency change?
• Who will operate remote keypads at alarmed facilities?
• How does VICADS display video during an alarm?
• Which device would alert if a box is tampered with?
• Which key opens the Help window?
• Which key displays all alarms in their current state?
• Where are the S.M.A.R.T function keys located?
• Who must approve deferring an alarm?
• To indicate a suspect in custody who is of opposite gender, which code is used?
• The Vindicator SMART system conducts all polling for which system?
• Which code represents Duress on post/patrol?
• Which documents are used to document alarm tests?
• Where are junction boxes located?
• What does BLUE steady indicate?